Jeep Grand - Popular Questions, Answers, Tips & Manuals
Limp Home Mode - No Codes
Bad battery, or bad ground. If thats not it put a code reader on it while its running in limp mode and see what she says.
Why is my 2007 Grand Cherokee compass stuck on N with a CAL indication?
ReDUX 1.ok, you edit the post with NORTHN can mean lots of thingsare you saying the transmission is stuck in Neutral. NO. NORTH Fails.but my answers the same, ever read the bookthe jeep bible. called SM. the real manual.did you know its free? the reals story is you open operators guidethen read the compass (headings ) page.pushed the buttons and failed. bingothen read the service page, it answer ALL THAT http://jeepdied.com/books.html
2007 grand Cherokee parking sensors stopped working! After start up get a beep and 2 lights flash! The park asst fail light is on, on the dash! Everything else seems to be ok! Any ideas please??
the magic is busted.all you can do is what, check fuses or get it servicedor read the operators guide, on its usage and options, did you?if you are tech savvy, or can read wellthe SM cover this and is free to read, 24/7 at no cost to youand is real book.why not read that first.posted here over 300 times now.click WK jeep your car is WK. (the secret jeep code for USA jeeps only)we are USA site with USA cars.start reading on 8B page 72, park assist.its all there, to read, at all times.and is official book not hacks/clones, or abridgements. the real deal. there.btw, searching the PDF works too, its OCR readyand chapter 8w shows all wiring to it. every inch
How to fix a noisy water pump on a grand jeep Cherokee 2007 3.00 deseil
a noisy water pump ( low growl or rumble noise) is a problem bearing and the cheapest fix is a new water pump
squeaks or other high pitched noises can be tested with soapy water on the belt--noise will stop for a short period of time
If the water pump housing is cast iron, you may be able to get a repair kit for the pump but the cost of the kit and the labor to do the job is generally around the price of a new pump
Will not start then the next day it starts
Crank sensor is common problem on these. They are interminate and usually cut out when hot and will restart after they cool off. Connectors and even oil in the connections from leaks.
STARTS BUT WON'T STAY RUNNING
Could be something as simple as a dirty fuel filter.
Get a can of quick start at the store and have someone start it up, when it wants to die squirt a shot into the intake ... if it runs again for a bit you have a fuel delivery issue. Check the fuel pressure to see if the pump is functioning properly.
I have jeep cherokee diesel 2007 3.0 liter.my problem is no fuel injector
"no fuel injector"i can not decode that, sorry.why not post full symptoms. does car run?no start?hard starts?want start cold. only?ever check fuel filters firsts?and glow plugs for working (hard starts)?does test fuel start it or short time?what?no injectors can mean.1: all 4 spark plugs dry not wet and will not start.2: one or more injectors fail the noid light test.dead signals to one or more... that?3: one or more dont click running, that?4: fuel rail is dry?
Have 2007 Jeep GC, v-6, dash lights started flashing and gauge needles swung in full arc, what's cause?
what lights, be clear, there are like 10 or more lights there.
warning lights, illumination?
so the guages stick high, do say what they do and where they end up.?
name all lights that flash,
is car battery charged up? at 12.6vdc rested.
does car start?
does car drive ok>
do headlights work perfectly?
my other shoe drops, do tell all good, bad and ugly and pretend
we are blind, we are.
the cluster you mean the dash is huge thing, with lots of stuff there.
radio is part of dash
the cluster on this jeep is really a stand alone digital display.
it has 2 power pins, and 2 ground pins. for power
and 2 fuses. (are they both good and not loose")
the CLuster brain, is a computer too. as are most modules in this car.
if it has power it boots up with PCM with key turn
and attempts to link up communications with the PCM
and sync, up odometer readings.
and all other indications on the cluster are synced, now.
if you bet comm errors it will do odd things.
but we scan it next.
using any scan tools (even $5 one with canbus)
we scan it and see errors.
i bet you do.
and that, tells you whats wrong.
Not finding what you are looking for?