GMC Cars & Trucks - Answered Questions & Fixed Issues


Depends on what vacuum lines google it select show images or auto zone has diagrams on line

GMC Cars &... | Answered 24 hours ago | 15 views


Yukon w/ Front & Rear AC...


R134A 43.00 ounces. Oil PAG 46 11 ounces

https://www.techchoiceparts.com/refrigerant-and-oil-capacities/gmc-light-truck

The trouble is that you can't do it yourself. You need to suck all the refrigerant and air out. You need to fix the leak. Then under a vacuum you refill with gas and oil.

https://www.google.com/search?q=CLARION+NXR12&rlz=1C1QJDB_enCA643CA644&oq=CLARION+NXR12&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

GMC Cars &... | Answered Yesterday | 15 views


You may have inadvertently disconnected the shift cable at the transmission, or the cable end may have broken.

1996 GMC Jimmy | Answered 3 days ago | 47 views


Use a good scan tool to check for a reading from the key,you may have to reset the key to the vehicle or replace the key reader or associated parts,the scan tool should identify the problem with the system.

2010 GMC Sierra... | Answered on May 19, 2019 | 29 views


Power comes to the barke switch from fuse STOP LP 20A on an orange wire. Comes out of switch on white wire

2004 GMC Sonoma | Answered on May 19, 2019 | 28 views


Have you confirmed that its not a security issue? Did it die suddenly or was it bogging out for a while? Have you scanned the engine?

2000 GMC Yukon... | Answered on May 19, 2019 | 34 views


Hi friend, firstly on the main command where you can control all the windows has a button that when you put it off only the driver's window will work, so you have verify if the button is not activated!! .if it's not activated then you will have to control the fuse related to the windows, an if all the fuses are fine then go to the windows motor .

GMC Sierra Cars... | Answered on May 18, 2019 | 17 views


I DON'T KNOW. LOOK TO SEE IF THERE IS ROOM TO MOVE TIRES OUT A BIT. YOU COULD USE A UNIVERSAL RIM SPACER. EXPENSIVE BUT TRADING FOR A DIFFERENT TIRE PROFILE OR DIFFERENT RIM WITH LESS SET BACK MIGHT BE CONSIDERED. SOME OLDE OLDS HAD DIFFERENT OEM RIMS TO CLEAR CALIPERS.

GMC Sonoma Cars... | Answered on May 18, 2019 | 20 views


Do you have any codes like PO300?

GMC Cars &... | Answered on May 18, 2019 | 16 views


Can you give us more as to what the problems are that you are experiencing?

GMC Cars &... | Answered on May 18, 2019 | 12 views


check your manual for location

2004 GMC Yukon... | Answered on May 17, 2019 | 17 views


Great engine what's the question?

GMC Cars &... | Answered on May 17, 2019 | 26 views


Flasher module should be located behind the glove box on connector C203 bolted to the firewall. You may be able to get at it by opening the glove box, and then releasing the stop tab at the top left of the opening to swing the box out of the opening on its hinges.

1997 GMC Jimmy | Answered on May 16, 2019 | 23 views


Do you know what year the engine is or what vehicle it came out of?
Most older GM engines are 2.5L
The newer they get, the more they can change.

GMC Cars &... | Answered on May 16, 2019 | 27 views


either debris or latch / linkage damage /disconnect crawl into back with a flashlight and long screwdriver remove the plug in rear panel and use screwdriver to move latch release

2010 GMC Terrain | Answered on May 16, 2019 | 27 views


what switch theirs only about 7

2004 GMC Envoy... | Answered on May 14, 2019 | 13 views

Not finding what you are looking for?
GMC Logo

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,174 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

2002 GMC Envoy
2002 GMC Envoy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,325 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,100 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...