Acura Cars & Trucks - Page 3 - Recent Questions, Troubleshooting & Support
Transmission control module location on my 98 Acura 30 cl
The Transmission Control Module (TCM) on a 1998 Acura 3.0 CL is located under the center console, just in front of the shifter. To access it, you will need to remove the center console by unscrewing and prying off the cover around the shifter and then removing any screws or bolts holding the console in place.
However, slow gear engagement and trouble shifting into 2nd and 3rd gears can have multiple causes, and the TCM may not necessarily be the root cause. It's best to have the vehicle diagnosed by a qualified mechanic or Acura dealership to determine the exact cause of the transmission issues.
1993 Acura Legend 4 door. Why doesn't my rear
if the windows work when hooking to battery, then check the switches and wiring. it may even be a bad ground. I worked on power window a few months ago, and it had a bad ground as not to work. try by running a wire from motor or ground connection to a bare spot on door. if the window works then you can either put in a screw or ground to something on door.
What would cause my 01 acura cl 3.2 to shutter i changed coil packs and spark plugs and it still sounds like its missing
- Faulty fuel injector: A clogged or faulty fuel injector can cause insufficient fuel supply to the engine, resulting in a misfire.
- Ignition system problems: A faulty ignition coil, ignition control module, or distributor can cause a misfire in the engine.
- Vacuum leaks: A vacuum leak in the engine can cause an imbalance in the air-fuel mixture, leading to a misfire.
- Faulty EGR valve: A malfunctioning EGR (Exhaust Gas Recirculation) valve can cause a misfire by altering the air-fuel mixture in the engine.
- Low compression: Low compression in one or more cylinders can cause a misfire.
To diagnose the specific cause of the misfire in your car, you should take it to a qualified mechanic who can perform a diagnostic test to pinpoint the issue. They may use a scan tool to check for any stored error codes in the car's computer or perform a cylinder compression test to check for any issues with the engine's compression. O
How do I fix my Acura MDX 2006 DVD player
To fix your Acura MDX 2006 DVD player, you will need to check the power connections, check the disc for any scratches or dirt, and make sure the disc is inserted correctly. If the issue persists, you may need to replace the DVD player or have it serviced by a professional.
Acura 2008 MDX phone blue tooth connect is grayed out
If the Bluetooth connection and HFL (HandsFreeLink) option on your 2008 Acura MDX are grayed out, it may be due to a few different causes. Here are some possible solutions:
- Check to make sure that your phone is compatible with the Bluetooth system in your Acura. If your phone is not compatible, it will not be able to connect.
- Make sure that the Bluetooth feature on your Acura is turned on. If it is not, you will not be able to connect your phone.
- Make sure that your phone's Bluetooth feature is turned on and that it is in pairing mode. If it is not, you will not be able to connect.
- Make sure that the phone is not already paired to another device. If it is, it will not be able to connect to your Acura.
- Check for software updates for your Acura's radio or navigation system. Sometimes updates can fix issues with Bluetooth connectivity.
- If your Acura was recently serviced, the technician may have disconnected the battery, which could cause the settings to be lost. In this case, you may need to have the settings reset by a Acura dealership.
If the problem persist, it may be necessary to take your vehicle to an Acura dealership to have it checked and repaired if necessary.
Hi, I have a 2007 Acura MDX and the tail liftgate won't open.
There could be several reasons why the liftgate on your Acura MDX is not opening all the way. Here are a few things you can try to troubleshoot the issue:
- Check the latch mechanism: Make sure that the latch mechanism on the liftgate is not damaged or stuck. You may be able to manually release the latch by pushing on the release button or pulling on the emergency release cord (if your vehicle has one).
- Inspect the liftgate struts: The liftgate struts may be worn out or damaged, preventing the liftgate from opening all the way. If the struts are the issue, they will need to be replaced.
- Check the liftgate hinges: Make sure that the hinges on the liftgate are not damaged or stuck. If the hinges are the problem, they may need to be lubricated or replaced.
- Check the wiring and connections: Make sure that all of the wiring and connections to the liftgate motor and latch mechanism are secure and in good condition.
- Check for any foreign objects: Make sure that there are no foreign objects blocking the liftgate from opening all the way.
If you have tried these troubleshooting steps and are still unable to get the liftgate to open, it may be necessary to have the issue diagnosed and repaired by a mechanic.
I need to reset my 2011 mdx radio code
Hello, there are several places the company will put your code. First check the glove box second the drivers side door jamb third is the engine compartment fuse box cover inside the cover, The code will always a 5 digit code good luck and save money Mike L.
Not finding what you are looking for?