Question about ATVs

Open Question

Getting spark but back cylinder not firing on ,4010 mule

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 21949 Answers

SOURCE: I have a Kawasaki Mule 4010 2012 ,steering turns the wheels do not turns?

damage to shaft or steering gear

Posted on Nov 13, 2016

Testimonial: "Great thanks"

Ad
5keepers541
  • 3577 Answers

SOURCE: i have a 2006 kawasaki mule trans 4x4 it gets gas spark plugs are firing but will not run

Hey Mike,
An internal combustion engine only needs three things to run...(assuming the internals are all good)..

1. A properly timed spark
2. Correct air/fuel mixture
3. Compression

which of these are you missing??

Posted on Aug 23, 2017

emissionwiz
  • 85114 Answers

SOURCE: what will cause an ecu to go out on a 2009 kawasaki mule 4010

Electronic component failure inside the PCM module..

Posted on Dec 27, 2017

Testimonial: "there is no pcm module on my 2009 mule4010"

nolanchupp14
  • 37 Answers

SOURCE: The horn on my Kawasaki 4010 mule does not work can't find help in manual

check the connection if thats good then it could be that you need a knew horn module

Posted on Mar 26, 2018

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Free repair manual 2007 kawasaki kaf950c


Hi, Lynda the vast majority of service, parts, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee around $10 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. To download your manual please click on the links below. Good luck and have a nice day.
Kawasaki KAF950GDF Service Manual
OEM Parts for Kawasaki
Kawasaki Mule 4010 Trans 4x4 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 22, 2016 | kawasaki 2012 Mule 4010 4x4

1 Answer

There is no fire to the spark plugs but will turn over what to check


First replace the spark plug with a new one. Then check the wires from the positive terminal on the battery to the coil and then to plugs. Put a 12 volt tester on the positive wires and the battery ground or any metal on the engine to see if circuit is hot. Hope this helps. Make sure you test the plug wire as well.

Sep 21, 2015 | kawasaki 2009 Mule 4010 Trans4x4

1 Answer

What makes the DFI light come on but the engine still runs but seems to run slow


More than likely you have either a bad coil or the rocker arm has slipped off. Pull each plug, Check plug. If 1 is fouled, that cylinder is where the problem is. Check for spark on each cylinder, If one has no spark, replace the coil (there are 2). Replace only the bad one. Before replacing the coil, check for compression, if on is real low, pull off the rocker cover and check for valve action.

Jan 30, 2015 | kawasaki 2011 Mule 4010 4x4

1 Answer

2012 kawasaki mule 4010 hitting on front cylinder only


First is the engine Diesel or Gas?
if it is a diesel engine it has almost got to be a compression or fuel problem if it is a Gas engine it can be a valve adjustment, fuel, compression, or spark problem

May 16, 2014 | kawasaki 2012 Mule 4010 4x4

1 Answer

Kawasaki Mule 1999 Model


Hello Anon..
First, I would check to make sure the carbs are getting fuel, and then fuel getting into the cylinders. Your question about low oil - did you let it get low and then it quit? ...
If you put oil into the cylinders and only got 100psi, this might be your problem. You should be pumping around 120+psi without putting anything into the cylinders... Recheck the compression.= .take out all spark plugs...screw the gauge in until the o-ring seats, hold the throttle wide open while spinning the engine over for about 5 seconds... you should get 120psi +/- 10psi.
If you are getting less than 100psi.. it might be time for a rebuild..

May 24, 2017 | kawasaki 2005 Mule 3010 Trans 4x4

Not finding what you are looking for?
ATVs Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

21946 Answers

Marvin
Marvin

Level 3 Expert

85111 Answers

 Scott Tx
Scott Tx

Level 2 Expert

604 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...