SOURCE: engin keeps hunting when idling
This is not an automotive forum. You posted this in a computer forum.
SOURCE: modification problem
replace it with the original fuel delivery system would be the best way to go!! try a junkyard
SOURCE: i have telstar tx5 ghia
Hi
Easiest test is to reconnect jumper cables and switch lights on, if these work and no noise AT ALL from starter, NO clicking at all then could be the jumper cables are too light like most are. Try 2 sets of jumper cables. Ensure that the cables are correclty applied, Red to Red and the black is the last connection to a good steel part on your engine, NOT the battery.Always ensure the car being used to jump from is running at all times while cables are connected.When it starts remove this one FIRST also.
Cheers cbacer
SOURCE: hi, my behringer us 600
Check if the connection of the input cable MIGHT be intermittent. The sleeve of the connector enables the battery when the cable is inserted. If the cable is moved in the least and the sleeve makes intermitent contact that would cause your problem... a lesser probability is a loose battery contact.
SOURCE: cf moto 250 revs but won't move
Broken belt or worse, possibly, mine broke a transmission shaft.
714 views
Usually answered in minutes!
×