ATVs Logo

Related Topics:

M
Mike Ragsdale Posted on Aug 23, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 2006 kawasaki mule trans 4x4 it gets gas spark plugs are firing but will not run

1 Answer

Steve P

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • ATVs Master 3,912 Answers
  • Posted on Aug 23, 2017
Steve P
ATVs Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 15, 2012
Answers
3912
Questions
5
Helped
1306020
Points
15904

Hey Mike,
An internal combustion engine only needs three things to run...(assuming the internals are all good)..

1. A properly timed spark
2. Correct air/fuel mixture
3. Compression

which of these are you missing??

2 Related Answers

paul4_judith

paul

  • 1190 Answers
  • Posted on May 27, 2014

SOURCE: front hub removing

remove the wheel then undo the big nut in the center then remove the brake caliper then remove the big nut and the hub will come off !

Ad

Darrell

  • 388 Answers
  • Posted on Nov 27, 2015

SOURCE: 2000 Kawasaki 220 Bayou. Why is spark plug not firing?

make sure coil is good and all safety switches are working

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2002 Kawasaki 3010 620E will not start. Plowed snow all winter and went to put away and will not fire. Changed gas, plugs and it has compression. I am lost.

Did you drain the carburetor at the end of the season, or shut off the gas valve and run the carburetor dry? If not, the issue is probably varnish and gum from the evaporated gas plugging up the carburetor. You will have to pull the carb apart and clean it.
0helpful
1answer

I have a 2003 kawasaki mule model 3000 it wont say running at idle what to do

Full tune up and carb clean .get new plug,air filter.oil Chang ,carb clean and adjustment.that should do it.,., try fuel filters and test fuel pump see if it's functioning properly.,.
0helpful
1answer

What is the best way to winterize mule stored in a garage

There's a drain screw on the bowl of the carburetor - either run the gas out - or turn the valve to off and drain the gas in the carburetor. I also take the spark plug out and spray on top of the cylinder and all around - anything metal. GETSOME is a product out of Florida that actually works. Disconnect the battery and hook the battery up to a 2amp tender/not charger - you'll need the battery tender that keeps the voltage correct but doesn't over charge - reverse when the seasons change and you should be good to go -
0helpful
1answer

Where is the neutral safety switch for a kawaski 3010 mule

Kawasaki Mule Update - YouTube

? 2:16
www.youtube.com/watch?v=Fw_jeQUU6Hw
Jan 25, 2013 - Uploaded by Penguinboy1995
solenoid is reading battery voltage and the constant hot, it is not sending the 12 volts from the switch to the ...
0helpful
1answer

Hard to start after it warms up but once you get it to go it will be fine till you shut it off then problem is back

My lawn tractor with a Kawasaki engine had the same problem. I found that the linkage for the gas throttle had a lot of dirt on it and would not let the throttle close completely. So when I shut off the warm engine, gas leaked into the cylinder. It would take a lot of cranking to start. When it did start, the exhaust put out black smoke.
0helpful
1answer

2012 kawasaki mule 4010 hitting on front cylinder only

First is the engine Diesel or Gas?
if it is a diesel engine it has almost got to be a compression or fuel problem if it is a Gas engine it can be a valve adjustment, fuel, compression, or spark problem
0helpful
1answer

What is possible cause that a mule 3010 kaf620e6f will not hold idle?

Air leak .dirty air filter.,.fouled plug.,.bad gas.,.dirty carb?fuel injection? Bad fuel filter ,fuel pump test fuel pump that's the general stuff.go from there
0helpful
1answer

Kawasaki Mule 1999 Model

Hello Anon..
First, I would check to make sure the carbs are getting fuel, and then fuel getting into the cylinders. Your question about low oil - did you let it get low and then it quit? ...
If you put oil into the cylinders and only got 100psi, this might be your problem. You should be pumping around 120+psi without putting anything into the cylinders... Recheck the compression.= .take out all spark plugs...screw the gauge in until the o-ring seats, hold the throttle wide open while spinning the engine over for about 5 seconds... you should get 120psi +/- 10psi.
If you are getting less than 100psi.. it might be time for a rebuild..
Not finding what you are looking for?

188 views

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

29494 Answers

Dmitry Isayev
Dmitry Isayev

Level 2 Expert

129 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...