At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it should run rough any more then an idle the code is throttle safety signal voltage to high.a dealer should be able to flash the chip and as far as driving it whats it run like
Carburetor could be dirty or fuel filter clogged. Put a container of carburetor cleaner in your gas tank, fill it up, and run at idle for 5 minutes, see if that helps clear up the problem. Carburetor float could be stuck, or choke plate.
Hey Anon,
Cleaning a carb is not an easy undertaking,, there are several tiny passages, tiny jets, and the needle/seat assy, If you are not trained to know these.. you may not get the carb as clean as it needs to be... Install a new spark plug... a new air filter.. and get a qualified pro to clean and set the carb.
Try cleaning the spark plug with fine grit sandpaper,make sure air filters is cleaned,then make sure carb is cleaned pilot or idle jet might be clogged. good luck
×