If that is the plunger type choke it is stuck. Try to get the choke out of the carb clean it and put Vasoline on it and it should work fine. I have ran into to this a few times.
SOURCE: Suspected problem with choke.
hey apparently and did are two different stories draining the float bowls and cleaning the carbs are two different things the fact that the choke dosent change suggest the carbs are stopped up after sitting for 1 year clean the carbs let them soak in carb cleaner and blow them out with high pressure air, keep notes of the adjustments befor you dissasemble them (air screws)
SOURCE: 2003 honda crf 150 will
The carb jets need to be cleaned.
Please take time to rate this fixya
SOURCE: Honda magna wont stay on
the throttle ports are dirty clean air filter and run some cleaner threw the caburator and lube the choke assembly and throttle cable and check for sticky plates, if they are not sticking clean out the intake ports with carburator fluid then adjust needle valves to run smooth and back the choke off as you adjust. once warm and plates are fully open and ideling rev it to see if it reves up, if not check for intake leak in the intake hose or throttle plate or carb screws. use starting fluid to locate intake leaks.
SOURCE: 2002 Honda SHADOW SABRE It wont stay running unless it's
More information is needed - aftermarket pipes? any carb work been done to it? is fuel fresh? air filter condition? how are the plugs burning? oily black, white/tan?
256 views
Usually answered in minutes!
×