At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A lack of fuel. Obviously the idle/low speed circuit is working inside the carburetor, but the high speed circuit isn't flowing fuel. You need to disassemble the carb and remove the main jet and needle jet and clean the holes in each. Then with some aerosol carb cleaner, blow out all the passageways. If it can get fuel, the motor will accelerate. One final thing to check is the air filter. Clean as necessary.
Check the MAF-MAP SENCER or it's a throttle position sencer is bad check both by replacing them and see if it works or the last result is idle control valve
You adjust the idle screw on the carburetor, to do this you will need to run the ATV, rev it and tweak the idle and throttle screws accordingly. Between revs you will need to adjust the idle screw and the throttle screw if needed.
First question since i am assuming it was just sitting around for some time if i am correct you need to pull the carb remove the float bowl and components if everything was done correctly with your rebuild the likely problem is your carb is gummed up remove everything in the carb low speed jet etc. soak everything in sea foam fuel cleaner overnight and hopefully you have some compressed air and blow out that low speed jet and passage way pay close attention that you have see fluid coming from the other end and check the jet make sure it is unclogged hold it up to the light.
×