No power to 4x4 actuator - kawasaki 2005 Prairie 700 4x4

gear or actuator problem

check to see if actuator is moving to lock position

Safety switch to prevent starter actuation when in gear. Look for a switch along the shift lever somewhere.

Check your fuses.

Does it show that it's engaged on the screen? Check your actuator, it's probably damaged. Check your wires and connections as well.

Depending on the flashing frequency, it could be the Electronic BRake controller, the 4x4 actuator or the brain.

Look for the service manual online, it has a procedure for checking/cleaning the actuator. It could be stuck with dirt and need a cleaning.

Some times the four wheeler is not in right position for 4x4 to engage safely so it throws it in to safety mode so it don't slam in to 4x4 with grindage an damage that's my experience. If it seemes to work fine when working run it . . Could need service,fluid change and 4x4 actuators,.,vacuums switches tested also ...

not to familiar with the part, but I have good success with using JB weld