20 Most Recent
Suzuki 2012 KingQuad 400 ASi 4X4 Questions & Answers
How can i start 300 king quad that is stuckn in gear
I assume you rocked it back and forth to try to get it out of gear. Usually there is a lock-out that prevents the starter from operation when it is in gear. I don't know your specific model but you would have to defeat that feature to crank the engine. Not a good idea.
You really have to get it in neutral because even if you got it started you are looking at some other problem with the transmission.
It has burnt out two coils and keeps doing it help
YOu have a short somewhere. You are going to have to trace every high tension circuit wire and check them with a simple multimeter... very cheap to buy. Put it on resistance and check the values. It the values are close, no problem there. It's your electronic ignition system then. Don't bother replacing the coil again as it will burn it up. You will need specialized assistance to determine exactly which part is faulty. Check all your grounds too!
Stalling
The CDI box could be bad or the coil could be breaking down so maybe a new coil would fix you up they only run around 20$ cdi box on the other hand can cost an easy 100$ or better you might also try changing the oil but make sure to buy kinda thick oil cause it's cold out
Does not want to idle
Hello Anom,
I do need more information to truly help you. Has the ATV (??..engine size, carb, fuel inj., year,??..etc.).. been sitting for a while...the carb is probably in need of a simple cleaning (all internal passages), a new spark plug, clean/treat or replace the air filter will probably get it running!
Please post more info.
Thanks, Steve
3/12/2016 12:41:33 AM •
Suzuki ATVs
•
Answered
on Mar 12, 2016
Can't find how to trouble shot the horn on my 2015 Kawasaki mule
take off the horn unit power it direct if it works its ok, if not replace, next step wire a small bulb into the horn wires and press the button if it lights the switch is ok, if you have a circuit tester put one end on the battery ground and check for power in the horn wires if their is power there put the lead on battery positive and press the horn button if there is no power their the switch or wiring is faulty
4/16/2024 10:19:40 PM •
ATVs
•
Answered
2 days ago
Not finding what you are looking for?