20 Most Recent Polaris ATV Questions & Answers


Should be petcock to pump, pump to carb, carb to engine.. and you have a vacuum line that makes the pump work ..usually from carb/intake to pump.

Polaris ATV | Answered on Jun 11, 2019


Have you check the injectors ? If anything is coming out.

Polaris ATV | Answered on May 26, 2019


Your problem is not clear. So you may do some more research and then take a decision.
I found this video from youtube. I hope this can be helpful. video link: https://www.youtube.com/watch?v=01Rc80ykfVs

Polaris ATV | Answered on Apr 29, 2019


Hello there,

I found this video for you. I hope this could help you!
video from youtube: Polaris sportsman 570 code problem fix https://www.youtube.com/watch?v=YR8DN5oWazc

Polaris ATV | Answered on Apr 25, 2019


I am guessing you mean the float is sticking and leaking gas? If so, remove the carb and have it sonic cleaned. The jet that the float opens and closes and should be inspected for wear. In some instances, the float should be weighed for fuel saturation. That may prevent proper floatation in order to fully close the fuel flow once the bowl is full allowing the fuel to continue flowing.

Polaris ATV | Answered on Apr 25, 2019


If the machine is running okay before this happens, lift the seat and side covers , check for loose wires and plugs. 99 percent of time this is the problem is evreything seems to be working and it suddenly dies as your riding it.

Polaris ATV | Answered on Apr 13, 2019


Look on the steering crown on the frame.

Polaris ATV | Answered on Mar 24, 2019


Ive attached a video, but you can do this mechanically by adjusting your throttle linkage(but it may not be enough). I'd suggest making a "stop" or a mechanism to physically stop the throttle from opening up on the engine end at the carburetor or throttle body. You must add something to interfere with your engine being able to "open up", I'd reduce it so that it only opens up 15%-20% which will severely limit performance.

Another option is to add an aftermarket Rev Limiter like a MSD unit, or find any rev limiter compatible with CDI ignition and a Single Cylinder, that'll work and you can limit it to whatever rpm you prefer at the turn of a dial! I had to do this to a motorcycle and a drag car and used a simple adjustable rev limiter to keep others from mulling themselves or blowing my motor up!

45dfec08-9e75-4bb8-9422-bc60f1eb212c-uirlbmmdnsc10qdkrvpu2msd-5-0.jpeg

Polaris ATV | Answered on Mar 23, 2019


check wiring under vehicle going to diff for breaks

Polaris ATV | Answered on Mar 22, 2019


Spray some starter fluid into the throttle body. If it starts then it is a fuel problem. Check the fuses for injection operations.

Here is a video that might help. https://www.youtube.com/watch?v=3rhe2BzIOLA

Polaris ATV | Answered on Mar 19, 2019




check the plug on the rear axle for the tuff mode! make sure its plugged in

Polaris ATV | Answered on Mar 17, 2019

Not finding what you are looking for?
Polaris ATV Logo

4,065 questions posted

Ask a Question

Usually answered in minutes!

Top Polaris ATVs Experts

unhappyed

Level 2 Expert

106 Answers

john h

Level 3 Expert

21088 Answers

Marvin
Marvin

Level 3 Expert

84966 Answers

Are you a Polaris ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Polaris ATVs

  • Polaris ATVs

Most Popular Question

2012 ranger 400 4x4 not engaging front

  • ATVs
Loading...